How to Draw A Bubble Letter R. R is a message that is one of the most generally used letters in English vocabulary. It’s also odd since the letter’s diminutive, and capital versions differ.
Also, check our Unicorn Coloring Pages.
This can cause a headache for people learning to write them for the first time, but since we use them so much, it’s worth it!
You can probably write R easily, but this manual will be established how to draw a letter to Bubble R. This way, you can use it to make all types of awesome designs!
We’ll walk you through the process in a fun and easy way, then add some of your details and fun ideas to complete it.
How to Draw A Bubble Letter R
Step 1
Anytime we create a bubble version of a letter, we usually like to draw it with a pencil first. This is only sometimes necessary for the simplest letters, but R is quite complicated, and we highly recommend it.
If you do this, a pencil is the best idea as you can erase it when you’re done. Use your pencil to draw a standard R form and build the letter to the bubbles around it.
Now we can tighten the first actual stripe of the letter. This first stripe forms the left edge of the letter.
Just draw a vertical line with a slight curve. As shown in our reference image, a slightly clearer curve will be at the top of the line.
Try to make the stripe as smooth and rounded as possible! So we can move on to passage 2.
Step 2
Now we will add the rounded section on the right side of an uppercase R. This extends straight from the curved part to the top of the stripe from the last stage.
The curved line is all around and then into the middle of the letter. Take your best to make it pay our reference picture in the best possible way!
Notice the gap in the middle, as we’ll add more sections to this space in the next few steps.
With this part, we are, therefore, ready for passage 3 of the guide, so let’s move on.
Step 3
The next part of your Bolla R letter seems like the letter sprang from a leg. It will connect directly to the rounded line we designed in the previous step.
In our reference image, you can see a shape equipped with a curved line that folds abruptly at the end and then returns to the middle of the letter R.
It doesn’t seem very similar to an R right now, but if you picture it on a regular R, you’ll see where it goes!
We have one more space to fill to complete the system, and we will do it in the next step.
Step 4
Now we’re ready to complete the outline by adding two more lines to the image. The first will be a small curved line where the previous one ended.
We will use this smaller line to separate the two “legs” of the letter. This second tier will be laid out with a slightly curved line connecting the gap we now have left.
You now have your complete scheme for your R! We’re not over yet, but now you can safely erase any pencil line you used for the outline.
Be careful when deleting, as you could accidentally tear or remove the last few lines of the letter.
Then we will add the hole in the middle of the R in the fifth passage of the guide.
Step 5
In the previous step, we said we would draw the hole of the letter R and keep this promise!
If we were to draw a completely rounded figure for the fix, it would appear less like a bubble note and more like a flat outline on one flank.
We want to avoid it, so we use a special shape for the hole. It will be in the shape of a letter D, with a small line from the top left corner.
Refer to the reference image to ensure it is positioned and modelled accurately. Now you can see the drop letter R in all its credit!
We can make the shape and design, but we’re still ongoing. The next step will deal with some small details.
Step 6
The letter R we designed is flat on the side, but it’s made from a bubble or balloon with a few straightforward points.
The main way we will make this choice is to draw some reflective points on the letter. We added one in the top left corner and one near the middle of the letter.
They are aligned with each other to suggest a single light source shining on the letters. So we will add some lines in the letter near the contours.
These lines will make the letter appear full of air, pushing against whatever the letter is done with.
It’s a simple note, but it helps add depth and volume to the letter, even if it’s flat on the page.
Feel free to add other of these lines in different places as well! You can add fun details to the plan or draw essences around it to make it more special.
When you are ready, we move on to the last phase, where we colour your creation.
Step 7
Now that all the most challenging aspects of this design are finished, we can enjoy colouring it! This is a passage where you want to feel free to be creative as you, please.
We suggested following the guide carefully in earlier steps, but here you should try some of your choices and ideas.
For our example, we chose a nice combination of dark blue colours for the letter. However, we didn’t just use a shadow, and we made it clearer and darker depending on the section of the letter.
You will see that the colours are clearer near the darker light in the letter and elsewhere. This is an outcome you can reproduce no matter what colours you use.
It will be the last aspect that makes this note look more like a lump and can make a big difference!
Of course, you don’t have to limit yourself to a single colour. Instead, you can add a rainbow of colours and involve different tools and colouring techniques.
This is your chance to show what you know, have fun and see what happens!
Your Bubble Letter R Drawing is Finished!